QLB-200T Flat Vulcanizing Machine

The plate vulcanizing machine is suitable for the vulcanization of various rubber products and is an advanced hot pressing equipment for pressing various thermosetting plastics. The flat vulcanizer has two heating types: steam and electricity, which are mainly composed of the main engine, hydraulic system, and electric control system. The fuel tank is installed separately on the left side of the main engine and is not affected by the temperature of the hot plate; the operating valve is installed on the left side of the main engine, and the workers Convenient operation and spacious vision. The plate vulcanizing electric control box is separately installed on the right side of the host.

The plate vulcanizing machine is suitable for the vulcanization of various rubber products and is an advanced hot-pressing equipment for pressing various thermosetting plastics. The flat vulcanizer has two heating types: steam and electricity, which are mainly composed of the main engine, hydraulic system, and electric control system. The fuel tank is installed separately on the left side of the main engine and is not affected by the temperature of the hot plate; the operating valve is installed on the left side of the main engine, and the workers Convenient operation and spacious vision. The plate vulcanizing electric control box is separately installed on the right side of the host. Each electric heating plate of the electric heating type has 6 electric heating tubes with a total power of 3KW. The 6 electric heating tubes are arranged at unequal distances. Each section of the electric heating tube has different powers, so as to ensure that the temperature of the heating plate is uniform and the temperature of the heating plate is automatic. Control, high precision of temperature control, good quality of processed products. No pressure drop, no oil leakage, low noise, high precision, and flexible operation. Automatic rise, automatic fall, automatic exhaust, automatic pressure maintenance.

Technical Parameter:
Total pressure: 2000KN
Maximum pressure of working fluid: 16Mpa
Maximum stroke of plunger: 350mm
Hot plate area: 800x800mm
Plunger diameter: ￠400mm
Number of hot plate layers: 1 layer
Hot plate spacing: 350mm
Heating temperature: 0℃-300℃ (temperature can be adjusted)
Oil pump motor power: 5.5kw
Electric heating power of each hot plate: 7.2kw
Structural form: frame type.
Heating method: electric heating or steam
Control method: PLC control

Features:
No pressure drop, no oil leakage, low noise, high precision, flexible operation, automatic rise, automatic fall, automatic exhaust, and automatic pressure maintenance.