OEM/ODM Factory Foam Incubator - DRK-MJ Mold incubator series – Drick

Short Description:

Product Detail

Product Tags

Feedback (2)

We keep improving and perfecting our products and service. At the same time, we work actively to do research and development for Pesticide Residue Testing Kit, Electronic Pesticide Residue Tester, Plant Led Incubator, We always regard the technology and prospects as the uppermost. We always function hard to make terrific values for our prospects and give our customers far better products and solutions & solutions.

OEM/ODM Factory Foam Incubator - DRK-MJ Mold incubator series – Drick Detail:

1.Double door structure design, built-in super wide-angle glass inner door, which is convenient for users to observe test samples without dead angle

2.Patented double greenhouse temperature control system, which greatly improves the uniformity of temperature in the cabinet

3.The cooling capacity intelligent control system automatically adjusts the compressor cooling power and has the cooling capacity return function to help the compressor cool down quickly and extend the service life of the compressor.

4.Standard large-screen LCD display, multiple sets of data displayed on one screen, menu-type operation interface, easy to understand and easy to operate

5. Ultraviolet sterilization system, equipped with ultraviolet lamp, the sterilization efficiency reaches 95%.

6. Adopting international brand compressors and self-developed compressor cooling system, which can effectively extend the life of the compressor.

7. Adopt JAKEL pipe flow circulation fan, uniquely designed air duct, create good air circulation and convection, and ensure temperature uniformity.

8. PID control mode, low temperature control accuracy fluctuation, with timing function, the maximum time setting is 99 hours and 59 minutes.

9. Committed to the world environmental health initiative, using 134a fluorine-free refrigerant, high efficiency, energy saving and environmental protection.

1. BOD special socket-built-in power socket, convenient for the built-in instrument to power on.

2. Intelligent program controller-30-segment programming function to meet the needs of complex experiments.

3. Embedded printer-convenient for customers to print data.

4. Independent limit temperature alarm system-if the limit temperature is exceeded, the heating source is forced to stop, escorting your laboratory safety.

5. RS485 interface and special software-connect to a computer to export experimental data.

6. Test hole 25mm/50mm-can be used to test the actual temperature in the working room.

Project	70F-I	150F-I	250F-I	500F-I
Voltage	AC220V 50HZ
Temperature control range	0~65℃
Constant temperature fluctuation	high temperature±0.3℃ Low temperature±0.5℃
Temperature uniformity	±0.5℃
Temperature resolution	0.1℃
compressor	Import Danfoss compressors from Denmark
Freezer fan	Imported German ebian refrigerator fan
Studio material	304stainless steel
refrigerating system	Fluorine-free environmental protection
input power	400W	700W	1150W	2050W
Liner size W×D×H(mm)	450×320×500	480×390×780	580×500×850	700×700×1020
Dimensions W×D×H(mm)	575×545×1070	605×625×1350	705×725×1525	825×995×1780
Nominal volume	70L	150L	250L	500L
Carrying bracket (standard	2pcs		3pcs
Timing range	1~9999min

Note: The performance parameter test under no-load conditions, no strong magnetism, no vibration: ambient temperature 20 ℃, ambient humidity 50% RH.
1000L and other customized non-standard incubators can be customized according to user needs (customized product cycle is 30 to 40 working days after order confirmation).
When the input power is ≥2000W, a 16A plug is configured, and the rest of the products are configured with a 10A plug.

Product detail pictures:

Related Product Guide:

Dedicated to strict high-quality management and considerate purchaser support, our experienced employees members are usually available to discuss your specifications and be certain full shopper satisfaction for OEM/ODM Factory Foam Incubator - DRK-MJ Mold incubator series – Drick , The product will supply to all over the world, such as: Czech republic, UK, Lebanon, We now have been making our goods for more than 20 years . Mainly do wholesale , so we've the most competitive price , but highest quality. For the past years , we got very good feedbacks , not only because we offer good solutions , but also because of our good after-sale service . We are here waiting for yourself for your inquiry.

Culture Incubator

Fully Automatic Incubator

Lab Line Dry Bath Incubator

Laboratory Incubator

Low Temperature Incubator

Platelet Incubator

Thermostatic Drying Oven

Type Of Incubator

Uv Test Chamber

Vacuum Drying Oven

The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.