OEM Factory for Cimuka Incubator - High Temperature Blast Dryer Oven – Drick

1.Standard large-screen LCD display, multiple sets of data on one screen, menu-style operation interface,It’s easy to understand and operate.

2.The fan speed control method is adopted, and the wind speed can be adjusted freely according to different experiments.

3. The self-developed air duct circulation system automatically discharges the water vapor inside the cabinet, and there is no trouble of manual adjustment.

4. Adopt the controller with over-temperature deviation protection and microcomputer PID fuzzy processing to quickly reach the preset temperature and run stably.

5.With mirror stainless steel liner, semi-circular arc design at four corners.So easy to clean and the spacing of the partitions in the box is adjustable.

6.The sealing design of the new synthetic silicon sealing strip effectively prevents heat loss and can extend the length of each component on the basis of 30%.

7. PID control mode, small fluctuation of temperature control accuracy, with timing function, maximum time setting is 9999 minutes.

1.Independent limit temperature alarm system——If the temperature exceeds the limit, the heating source is forcibly stopped to escort your laboratory safety.

2.RS485 interface and special software——Connect to computer and export experimental data.

3.Test hole 25mm/50mm——can be used to test the actual temperature in the working room.

 Notice：Performance parameter test under no-load conditions, no strong magnetism, no vibration: ambient temperature 20 ℃, ambient humidity 50% RH.

When the input power is ≥2000W, a 16A plug is configured, and the rest of the products are configured with a 10A plug.