English
OEM Customized Normal Temperature For Incubator - DRK-MJ Mold incubator series – Drick Featured Image
  • OEM Customized Normal Temperature For Incubator - DRK-MJ Mold incubator series – Drick

OEM Customized Normal Temperature For Incubator - DRK-MJ Mold incubator series – Drick

Short Description:


Download as PDF

Product Detail

Product Tags

Related Video

Feedback (2)

We hold strengthening and perfecting our items and repair. At the same time, we get the job done actively to do research and progress for Humidity Of Incubator, Homemade Kerosene Incubator, Laboratory Drying Oven, By more than 8 years of company, now we have accumulated rich experience and advanced technologies from the generation of our merchandise.
OEM Customized Normal Temperature For Incubator - DRK-MJ Mold incubator series – Drick Detail:

1.Double door structure design, built-in super wide-angle glass inner door, which is convenient for users to observe test samples without dead angle

2.Patented double greenhouse temperature control system, which greatly improves the uniformity of temperature in the cabinet

3.The cooling capacity intelligent control system automatically adjusts the compressor cooling power and has the cooling capacity return function to help the compressor cool down quickly and extend the service life of the compressor.

4.Standard large-screen LCD display, multiple sets of data displayed on one screen, menu-type operation interface, easy to understand and easy to operate

5. Ultraviolet sterilization system, equipped with ultraviolet lamp, the sterilization efficiency reaches 95%.

6. Adopting international brand compressors and self-developed compressor cooling system, which can effectively extend the life of the compressor.

7. Adopt JAKEL pipe flow circulation fan, uniquely designed air duct, create good air circulation and convection, and ensure temperature uniformity.

8. PID control mode, low temperature control accuracy fluctuation, with timing function, the maximum time setting is 99 hours and 59 minutes.

9. Committed to the world environmental health initiative, using 134a fluorine-free refrigerant, high efficiency, energy saving and environmental protection.

1. BOD special socket-built-in power socket, convenient for the built-in instrument to power on.

2. Intelligent program controller-30-segment programming function to meet the needs of complex experiments.

3. Embedded printer-convenient for customers to print data.

4. Independent limit temperature alarm system-if the limit temperature is exceeded, the heating source is forced to stop, escorting your laboratory safety.

5. RS485 interface and special software-connect to a computer to export experimental data.

6. Test hole 25mm/50mm-can be used to test the actual temperature in the working room.

Project

70F-I

150F-I

250F-I

 500F-I

Voltage

AC220V  50HZ

Temperature control range

0~65℃
Constant temperature fluctuation

high temperature±0.3℃  Low temperature±0.5℃

Temperature uniformity

±0.5℃

Temperature resolution

0.1℃

compressor

Import Danfoss compressors from Denmark

Freezer fan

Imported German ebian refrigerator fan

Studio material

304stainless steel

refrigerating system

Fluorine-free environmental protection

input power

400W

700W

1150W

2050W

Liner size

W×D×H(mm)

450×320×500

480×390×780

580×500×850

700×700×1020

Dimensions

W×D×H(mm)

575×545×1070

605×625×1350

705×725×1525

825×995×1780

Nominal volume

70L

150L

250L

500L

Carrying bracket (standard

2pcs

3pcs

Timing range

1~9999min

Note: The performance parameter test under no-load conditions, no strong magnetism, no vibration: ambient temperature 20 ℃, ambient humidity 50% RH.
1000L and other customized non-standard incubators can be customized according to user needs (customized product cycle is 30 to 40 working days after order confirmation).
When the input power is ≥2000W, a 16A plug is configured, and the rest of the products are configured with a 10A plug.

Product detail pictures:

OEM Customized Normal Temperature For Incubator - DRK-MJ Mold incubator series – Drick detail pictures

Related Product Guide:
As a result of ours specialty and service consciousness, our company has won a good reputation among customers all over the world for OEM Customized Normal Temperature For Incubator - DRK-MJ Mold incubator series – Drick , The product will supply to all over the world, such as: Zimbabwe, Luxembourg, Turkmenistan, We have more than 200 staff including experienced managers, creative designers, sophisticated engineers and skilled workers. Through hard work of all employees for the past 20 years own company grew stronger and stronger. We always apply the "client first" principle. We also always fulfill all contracts to the point and therefore enjoy excellent reputation and trust among our customers. You are very welcome to personally visit our company.We hope to start a business partnership on the basis of mutual benefit and successful development . For more information please do no hesitate to contact us..
    • This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
    5 Stars By Anna from Uzbekistan - 2018.02.08 16:45
    This supplier offers high quality but low price products, it is really a nice manufacturer and business partner.
    5 Stars By Beryl from Madrid - 2018.07.26 16:51
    Write your message here and send it to us

    Products categories