MD-300 Solid Density Balance Digital Display Direct Reading Density Meter Specific Gravity Balance

Product application: rubber, plastic particles, aluminum products, powder metallurgy, mineral rocks, precision ceramics, glass industry, and other new materials research laboratories.

Applications:
Rubber, plastic particles, aluminum products, powder metallurgy, mineral rock, precision ceramics, glass industry, and other new materials research laboratories.

Technical Principle:
Solid mode: According to ASTMD297-93, D792-00, D618, D891, GB/T1033, JISK6530, ISO2781 standards, using Archimedean principle of buoyancy method, accurate and direct reading of measured values.
Hydrometer specifications:
1. Maximum weighing: 300g
2. Weighing accuracy: 0.01/0.005g
3. Density accuracy: 0.001 g/cm3
4. Density range: >1, <1 can be tested
5. Display value: proportion
6. Temperature and solution compensation settings: can be set freely
7. Online interface: RS-232
Machine accessories: specific gravity test bench, thermometer, clamp, weight, transformer, manual
·Just two steps to directly read the density value of the sample
This product can quickly detect the product density meter Import the most advanced density tester

Features and devices:
·Gold-plated ceramic capacitive sensor;
·Electronic balance with density test device can realize the density test of liquid and solid;
·Density direct reading, reducing tedious calculations;
·The accuracy of density measurement is one thousandth;
·Standard RS232 data output function, can easily connect PC and printer. ；
·The mass of the tested object in the air: ≥0.25g;
·The buoyancy of the tested object in the air: <-0.125;
·Dimensions, 80*200*265;
·Blue backlit LCD display;
·All stainless steel density bracket;

Measurement Steps:
①Put the sample into the measuring table, measure the weight in the air, and press the M key to remember.
② Immerse the sample completely in the water, measure the weight in the water, press the M key to remember, and directly display the density value.

Plastic particle measurement:
We will match the pellets with a beaker and tennis ball.
Measurement procedure
1. Put the beaker on the measuring table and put the tennis ball in the sink. Press the zero button to remove the weight
2. Pour the particles into a beaker to measure the weight in the air and record W1, then pour the particles into a tennis ball in the water to measure the weight W2 in the water, and then read the density and volume directly
Measurement of lumps with density less than one:

Measurement procedure
1. Put the anti-floating rack in the water and press the zero button to remove the weight
2. Put the product on the measuring table to measure the weight in the air and record W1, then put the product in the water to measure the weight W2 in the water, and then directly read the density and volume
Note: Be sure to clean with alcohol before measuring the weight of particles in water. Air bubbles will affect the measured value of W2.