M0010 Mattress Wheel Tester

The IDM mattress wheel tester is a priority mattress test equipment for each manufacturer. The mattress wheel tester is an instrument for testing the durability of all kinds of mattresses. It achieves test purposes by simulating long-term use (positive pressure, side pressure and turning over, etc.)

Model: M0010
In the mattress industry, there are several different methods for testing the spring and inner springs. Cornell tester is a firm and firm reservation for testing; the mattress wheel tester is used to test durability and impact.
The test unit roller pattern body width and weight in the mattress wheel tester, and then test the sample on the high direction of the sample on the sample after lower pressure. The roller is easily adjusted during the test, and the regulator can control the roller left or right to cooperate with the mattress related to the test. After the test is complete, the roller can be raised to facilitate replacement of the sample.
This test instrument is highly safe, and the exterior is equipped with an organic glass protection cover. All security doors must be closed, during the test, such as opening the security door, the mechanical mechanism will automatically pause to ensure the safety of the test personnel.
The control panel is all the operations of the mattress wheel tester. Since the mattress wheel performs a basic action, the control panel only needs to enter the required parameters, then the machine will automatically loop. The test can be paused at any time during the test process, open the security door, and observe the loss of the sample.
This test instrument, European standards and the US standard two large-class rollers selection (hexagons or cylindrical), and can also purchase and customize a series of accessories according to customer requirements.
Application range:
• Spring mattress
• Internal spring mattress
• Foam mattress
Features: •
Electronic counter and accumulator
• Three-dimensional construction
• High standards and safety protection
• Sample impact setting
Guideline:
• ASTM F1566
• BS EN 1957: 2000
• American InnerSpring Manufacturers
Options:
• 6 Single Test Roller: 109kg
• 8-sided test roller
• Special anti-slide
• Cylindrical test roller: 140kg
Electrical connections:
• 320-440VAC @ 50/60 Hz 3 phase
100-250VAC @ 50/60 hz 3 phase
(Customized according to customer needs)
shape:
• H: 2,100mm • w: 4,000mm • D: 2,150mm
• Weight: 600kg