I0001 Ink Wear Resistance Tester

Short Description:

This hydraulic sample cutter has two resilient safety switches that must be worked simultaneously with two switching machines while cutting the sample to achieve safety protection, prevent the operator from being injured. The pressure cutter is up to 10 tons.


Product Detail

Product Tags

This product is designed to determine the resistance of ink bonding quality, and paper, plastic and aluminum film surface inks. The ink friction gauge is used to evaluate the strong degree of combination of the ink and the printing surface. Dry friction (ink transfer from dry surface to another dry surface), wet friction (ink transfer from wet surface to another wet surface). In addition, the heating weight can be tested, and the hot ink friction transfer of the package, the label paper, and the like can be tested. The electric unit is simple to operate, and the startup device of the preset number counter is entered. It will rub the sample until the number of preset is reached.

Model: i0001
The ink abrasion tester is designed to determine the ink bonding mass, and the abrasion loss of the surface ink surface ink, plastic and aluminum film. The ink friction gauge is used to evaluate the strong degree of combination of the ink and the printing surface. Dry friction (ink transfer from dry surface to another dry surface), wet friction (ink transfer from wet surface to another wet surface). In addition, the heating weight can be tested, and the hot ink friction transfer of the package, the label paper, and the like can be tested. The electric unit is simple to operate, and the startup device of the preset number counter is entered. It will rub the sample until the number of preset is reached.

Operation method: A 2 or 4-pound weight of different speeds of linear reciprocution. Sweeping with a clean white board in the sample several times, then carefully check.
Application Material: Cartonboard printing, corrugated cardboard printing, paper, plastic, aluminum film

Product features:
• Speed ​​optional – 42 and 85 CPM
• Simple, fast test, accurate test conclusion
• 2 pounds and 4 pounds of weight
• Counter 0-9999
• 1 turn plate
• 1 indentation tool
• Make special molds
Sample: 152 × 51mm
Base: 152 × 76mm
Compliance: TAPPI T830, ASTM D 5264, GB 7706, JIS K5701, ISO 9000

Optional:
• Heating weight 2 pounds or 4 pounds
• Room to 150 ° C
• Standard BS 3110: 1959 – 1 Method
Power: 220/240 Vac @ 50Hz
Size and weight: • Long width height: 200mm × 301mm × 230mm • Weeks: 12kg


  • Previous:
  • Next:

  • Write your message here and send it to us