H0003 Textile Remotter Tester

Short Description:

During the test, the pressure of water gradually increased in one side of the sample. With test standard requirements, penetration should occur in three different places, and the water pressure data at this time should be recorded.


Product Detail

Product Tags

During the test, the pressure of water gradually increased in one side of the sample. With test standard requirements, penetration should occur in three different places, and the water pressure data at this time should be recorded.

Model: H0003
Textile-resistant tested tester is used to test textiles increasing at a certain water pressure rate
The anti-penetration performance in the case of the case. In the test process, in the sample
A pressure of water gradually increases. Test standard requirements, penetration
This occurs in three different places, and the water pressure data at this time should be recorded.

Application:
• All textiles that need to be measured to measure water

Features:
• Stainless steel test head
• High / low pressure gauge
• Explosion-proof seal
• Immersion tray
• Desktop operation

Guideline:
• BS 3424 Part 26
• AS 2001.2.17

Options:
• Stainless steel test head: 100 cm2 (in accordance with BS 3424)
• Stainless steel test head: Ø75mm (in accordance with AS 2001.2.17)

Air pressure requirements:
• 80PSI

Dimensions:
• H: 200mm • W: 400mm • D: 200mm
• Weight: 15kg


  • Previous:
  • Next:

  • Write your message here and send it to us