Factory source Humid Co2 Incubator - DRK-GHP Electrothermal constant temperature incubator – Drick

Short Description:

Product Detail

Product Tags

Feedback (2)

Sticking to the principle of "Super High-quality, Satisfactory service" ,We are striving to generally be a very good business partner of you for Muffle Furnace Working, Electric Motor Drying Oven, Homemade Incubator Temperature, Trust us, you will find a better solution on car parts industry.

Factory source Humid Co2 Incubator - DRK-GHP Electrothermal constant temperature incubator – Drick Detail:

★1. Compound door structural design,the built-in super wide-angle glass inner door is convenient for users to observe the test samples without dead angles.

★2. Patented dual chamber temperature control system, which greatly improves the uniformity of the temperature in the box

3.Standard large-screen LCD display, multiple sets of data on one screen, menu-style operation interface, easy to understand and easy to operate.

4.It adopts mirror-finished stainless steel inner tank, four corners and semi-circular arc design, easy to clean, and the spacing of the partitions in the box is adjustable.

5.Adopt JAKEL pipe flow circulation fan, unique design of air duct, create good air circulation and convection, and ensure temperature uniformity.

6.PID control mode, small fluctuations in temperature control accuracy, with timing function, the maximum time setting is 99 hours and 59 minutes.

1.Intelligent Program Controller-30-segment(此处不确定） programming function to meet the needs of complex experiments.

2.Embedded printer-convenient for customers to print data.

3.Independent limit temperature alarm system-if the limit temperature is exceeded, the heating source is forced to stop, escorting your laboratory safety.

4.RS485 interface and special software-connect to a computer, export experimental data.

Term	9050N	9080N	9160N	9270N
Voltage	AC220V 50HZ
Heating mehod	Water-jacket Type
Temperature range	RT+5~65℃
Temperature fluctuation	±0.5℃
Temperature uniformity	±0.5℃
Temperature resolution	0.1℃
Input Power	450W	650W	850W	1350W
Liner Size W×D×H(mm)	345×350×410	400×400×500	500×500×650	600×600×750
Dimension W×D×H(mm)	480×545×665	535×590×755	635×690×905	735×790×1005
Volume	50L	80L	160L	270L
Shelf distance（mm）	46	46	63	74
Standard partition/layer number	2/8	2/10	2/10	2/10
Timing range	1~9999min

Note: The performance parameter test is under no-load conditions, no strong magnetism, no vibration: ambient temperature 30℃, ambient humidity 50%RH.

Product detail pictures:

Related Product Guide:

The key to our success is "Good Product Quality, Reasonable Value and Efficient Service" for Factory source Humid Co2 Incubator - DRK-GHP Electrothermal constant temperature incubator – Drick , The product will supply to all over the world, such as: Iraq, Cyprus, Anguilla, we rely on own advantages to build a mutual-benefit commerce mechanism with our cooperative partners. As a result, we've gained a global sales network reaching the Middle East, Turkey, Malaysia and Vietnamese.

Dry Heat Incubator