Factory Cheap Hot Humidity In Incubator Too Low - DRK-MJ Mold incubator series – Drick

Short Description:

Product Detail

Product Tags

Feedback (2)

Our mission will be to become an innovative supplier of high-tech digital and communication devices by furnishing benefit added structure, world-class manufacturing, and service capabilities for Large Drying Oven, Pesticide Residue Analysis Instrument, Yoghurt Incubator, Together with our efforts, our products and solutions have won the trust of clients and been very salable each here and abroad.

Factory Cheap Hot Humidity In Incubator Too Low - DRK-MJ Mold incubator series – Drick Detail:

1.Double door structure design, built-in super wide-angle glass inner door, which is convenient for users to observe test samples without dead angle

2.Patented double greenhouse temperature control system, which greatly improves the uniformity of temperature in the cabinet

3.The cooling capacity intelligent control system automatically adjusts the compressor cooling power and has the cooling capacity return function to help the compressor cool down quickly and extend the service life of the compressor.

4.Standard large-screen LCD display, multiple sets of data displayed on one screen, menu-type operation interface, easy to understand and easy to operate

5. Ultraviolet sterilization system, equipped with ultraviolet lamp, the sterilization efficiency reaches 95%.

6. Adopting international brand compressors and self-developed compressor cooling system, which can effectively extend the life of the compressor.

7. Adopt JAKEL pipe flow circulation fan, uniquely designed air duct, create good air circulation and convection, and ensure temperature uniformity.

8. PID control mode, low temperature control accuracy fluctuation, with timing function, the maximum time setting is 99 hours and 59 minutes.

9. Committed to the world environmental health initiative, using 134a fluorine-free refrigerant, high efficiency, energy saving and environmental protection.

1. BOD special socket-built-in power socket, convenient for the built-in instrument to power on.

2. Intelligent program controller-30-segment programming function to meet the needs of complex experiments.

3. Embedded printer-convenient for customers to print data.

4. Independent limit temperature alarm system-if the limit temperature is exceeded, the heating source is forced to stop, escorting your laboratory safety.

5. RS485 interface and special software-connect to a computer to export experimental data.

6. Test hole 25mm/50mm-can be used to test the actual temperature in the working room.

Project	70F-I	150F-I	250F-I	500F-I
Voltage	AC220V 50HZ
Temperature control range	0~65℃
Constant temperature fluctuation	high temperature±0.3℃ Low temperature±0.5℃
Temperature uniformity	±0.5℃
Temperature resolution	0.1℃
compressor	Import Danfoss compressors from Denmark
Freezer fan	Imported German ebian refrigerator fan
Studio material	304stainless steel
refrigerating system	Fluorine-free environmental protection
input power	400W	700W	1150W	2050W
Liner size W×D×H(mm)	450×320×500	480×390×780	580×500×850	700×700×1020
Dimensions W×D×H(mm)	575×545×1070	605×625×1350	705×725×1525	825×995×1780
Nominal volume	70L	150L	250L	500L
Carrying bracket (standard	2pcs		3pcs
Timing range	1~9999min

Note: The performance parameter test under no-load conditions, no strong magnetism, no vibration: ambient temperature 20 ℃, ambient humidity 50% RH.
1000L and other customized non-standard incubators can be customized according to user needs (customized product cycle is 30 to 40 working days after order confirmation).
When the input power is ≥2000W, a 16A plug is configured, and the rest of the products are configured with a 10A plug.

Product detail pictures:

Related Product Guide:

Assume full duty to satisfy all demands of our clients; reach steady advancements by marketing the development of our purchasers; grow to be the final permanent cooperative partner of clientele and maximize the interests of customers for Factory Cheap Hot Humidity In Incubator Too Low - DRK-MJ Mold incubator series – Drick , The product will supply to all over the world, such as: Ecuador, Nairobi, Cancun, In order to make more people know our products and to enlarge our market, we have devoted a lot of attention to technical innovations and improvement, as well as replacement of equipment. Last but not the least, we also pay more attention to training our managerial personnel, technicians and workers in planned way.

Co2 Incubator