DRK520 Formaldehyde Emission Climate Test Chamber

Short Description:

The internal test room is made by high quality SUS304 stainless steel; heat insulating material: high density fiberglass wool; insulation material thickness: 80mm. The heat inside the internal room may not be conducted to the outside, to keep balanced and stable temperature inside the internal roo

Send email to us Download as PDF

Product Detail

Product Tags

Product Description

Brief Introduction of Structure

The internal test room is made by high quality SUS304 stainless steel; heat insulating material: high density fiberglass wool; insulation material thickness: 80mm.

The heat inside the internal room may not be conducted to the outside, to keep balanced and stable temperature inside the internal room;

One transparent window is located at a proper position on test chamber door, to obverse the change of specimen inside the internal room.

The window is made by multi-layered tempered glass. The internal binding conductive coating is transparent, heat insulation, steam and frost resistant and other advantages.

The mixing system adopts long axle fan motor, multi-blades wheel, made of stainless steel with good temperature resistance.

The air is circulated forcedly vertically in convection, to keep even and stable temperature inside the internal room.

The door and chamber body are sealed by high elastic double layer seal, with high temperature resistance.

The door inner plate is made by stainless steel. The door adopts non-reaction door handle, easy operation;

The test hole (at the left side of the machine) can be used for connecting power cable or signal cable (hole diameter and number can be decided by the user).

The cooling system is installed at the bottom. The compressor is "Tecumseh", imported from France.

The single cooling system can guarantee that the temperature or humidity reaches the setting value within the stipulated time.

The bottom of the test chamber is equipped with high quality PU moving wheels, which can be fixed. The test chamber can be moved conveniently to the place required ,

finally fixed.

The control system is at the right side of the test chamber, including temperature controller and control switches etc. convenient and easy operation and repair.

The air sampling system includes: sampling tube, two 100ml suction bottles, gas sampling pump, gas flowmeter

Main Technical Parameters

Temperature range	15℃ ~ 40℃
Temperature fluctuation range	±0.5℃ (at loadless state)
Temperature deviation	≤±2℃ (at loadless state)
Humidity range	30%~80% R.H
Humidity deviation	+2% -3% R.H
Humidity fluctuation	±2%
Heating and cooling speed	0.7℃~1.0℃/min (at loadless state)
Time setting range	0~9999 hours
Air exchanging rate (1/h)	1, (0.5~1.5)
Air flow rate (m/s)	0.1 ~0.3 adjustable
Evacuation rate of sampling apparatus (L/min)	0.1 ~ 1.5 adjustable, Accuracy: ± 5%
Total power	3 kW
Power requirement	220V 50Hz