DRK115-A Standard Screening Machine

DRK115-A standard sieving machine is a special laboratory pulp sieving machine (Somerville type equipment) manufactured in accordance with the TAPPI 275 standard. In the laboratory, the sieving machine vibrates up and down the sieve plate to glue the large pulp Impurities such as materials, plastics, silt, iron filings, etc. are separated for inspection and quantification, and a good slurry that meets the specifications can be obtained from under the sieve plate.

Product principle:
The DRK115-A standard sieving machine drives the camshaft through the motor pulley drive to vibrate the film up and down, thereby causing the slurry to vibrate up and down. The qualified slurry passes through the screen gap, and the unqualified fiber and slag remain on the screen.

Product Parameters:
Screen size: 307mm×268mm
Screen slot: length 45 mm, width 0.15 mm ± .005mm
Number of screen slits: 126×6=756
Screen slot size: 0.15mm
Motor power: 1.1KWW voltage: 380V
Rubber membrane and actuation: Amplitude: 3.2 +-0.1mm, eccentric wheel actuation with a speed of 690-700 rpm
Water flow rate control: 8.6 L / min. Water pressure: 1.23 Kg/cm2.
Dimensions: 700*400*1100mm
Optional sieve plate sieve slot specifications: 0.15mm, 0.2mm, 0.3mm, 0.35mm, 0.4mm, 0.45mm, 0.5mm.

Note: Due to technological progress, the information will be changed without notice. The product is subject to the actual product in the future.