100% Original Cell Incubator Co2 - DRK-DHG Air drying oven series – Drick

1.Standard large-screen LCD display, multiple sets of data on one screen, menu-style operation interface, easy to understand  and operate.

2.The fan speed control method is adopted, and the wind speed can be adjusted freely according to different testing.

3.The self-developed air duct circulation system automatically discharges the water vapor inside the box, no  worry about manual adjustment.

4.It adopts a controller with over-temperature deviation protection and a microcomputer PID fuzzy processing controller to quickly reach the preset temperature and run stably.

5.It adopts mirror-finished stainless steel inner tank, four corners and semi-circular arc design, easy to clean, and the spacing of the partitions in the box is adjustable.

6.The sealing design of the new synthetic silicon sealing strip effectively prevents heat loss, and can extend the length of each component on the basis of 30% energy saving Life.

7.Adopt JAKEL pipe flow circulation fan, unique design of air duct, create good air circulation and convection, and ensure temperature uniformity.

8.PID control mode, low temperature control accuracy fluctuation, with timing function, the maximum time setting is 9999 minutes.

1.  Embedded printer-convenient for customers to print data.

2.  Independent limit temperature alarm system-if the limit temperature is exceeded, the heating source  is  forced to stop, guarantees your laboratory safety.

3.  RS485 interface and special software-connect to a computer to export testing data.

4.  Test hole 25mm/50mm-can be used to test the actual temperature in the working room.

5.  Intelligent program controller-30-step programming process can be set to meet various complex testing.

Note: The performance parameter test under no-load conditions, no strong magnetism,
no vibration: ambient temperature 20 ℃, ambient humidity 50% RH.
When the input power is ≥2000W, a 16A plug is configured, and the rest of the products are configured with a 10A plug.